Performance and uncertainty analysis of a short-term climate reconstruction based on multi-source data in the Tianshan Mountains region,China

Short-term climate reconstruction, i.e., the reproduction of short-term(several decades) historical climatic time series based on the relationship between observed data and available longer-term reference data in a certain area, can extend the length of climatic time series and offset the shortage of observations. This can be used to assess regional climate change over a much longer time scale. Based on monthly grid climate data from a Coupled Model Inter-comparison Project phase 5(CMIP5) dataset for the period of 1850–2000, the Climatic Research Unit(CRU) dataset for the period of 1901–2000 and the observed data from 53 meteorological stations located in the Tianshan Mountains region(TMR) of China during the period of 1961–2011, we calibrated and validated monthly average temperature(MAT) and monthly accumulated precipitation(MAP) in the TMR using the delta, physical scaling(SP) and artificial neural network(ANN) methods. Performance and uncertainty during the calibration(1971–1999) and verification(1961–1970) periods were assessed and compared using traditional performance indices and a revised set pair analysis(RSPA) method. The calibration and verification processes were subjected to various sources of uncertainty due to the influence of different reconstructed variables, different data sources, and/or different methods used. According to traditional performance indices, both the CRU and CMIP5 datasets resulted in satisfactory calibrated and verified MAT time series at 53 meteorological stations and MAP time series at 20 meteorological stations using the delta and SP methods for the period of 1961–1999. However, the results differed from those obtained by the RSPA method. This showed that the CRU dataset produced a low degree of uncertainty(positive connection degree) during the calibration and verification of MAT using the delta and SP methods compared to the CMIP5 dataset. Overall, the calibrated and verified MAP had a high degree of uncertainty(negative connection degree) regardless of the dataset or reconstruction method used. Therefore, the reconstructed time series of MAT for the period of 1850(or 1901)–1960 based on the CRU and CMIP5 datasets using the delta and SP methods could be used for further study. The results of this study will be useful for short-term(several decades) regional climate reconstruction and longer-term(100 a or more) assessments of regional climate change.     

不同运输条件对合浦珠母贝稚贝存活比较

比较运输方式及环境温度对合浦珠母贝稚贝运输中的存活影响,从而为稚贝运输过程中的运输方式、环境温度及运输时间的把握提供借鉴和参考。以3月龄稚贝为实验材料,运用无水干露、加水淹没及包装充氧等3种方式,分别在环境温度为5、13、21和29℃下模拟运输。每隔3 h从每组运输条件下取出1组实验贝,转移到正常养殖环境下暂养恢复,经48 h后统计其存活率。对运输时间与存活率之间进行非线性参数曲线拟合,计算每组运输条件下的致死时间(T_0)、半致死时间(T_(0.5))及全致死时间(T_1);运用双因素方差分析,Duncan氏方法比较3种运输方式及4种环境温度间的均值。结果显示:包装充氧优于其他两种运输方式,而加水淹没又优于无水干露;温度为13℃和21℃时优于其他2个环境温度,环境温度为17.60～20.05℃是稚贝运输的最佳温度。     

马铃薯淀粉加工的副产物及资源化利用现状

马铃薯淀粉加工过程中会产生大量的副产物,如汁水和薯渣等,这些副产物中有机物含量较高,且COD(化学需氧量)、BOD(生物需氧量)均超标,无法直接排放,作为废弃物又会造成资源的浪费。为减少资源浪费和环境污染,近年对马铃薯淀粉加工副产物处理及资源化利用的研究成为热点。文章主要介绍了马铃薯淀粉的特性、用途、加工过程中副产物的来源,并对目前马铃薯淀粉加工副产物的处理方法及资源化利用现状进行了综述。     

高含固率木质纤维素厌氧发酵物总DNA的4种提取方法比较

不同的样本特性和提取方法对获得微生物总DNA的质量有重要影响。文章基于高含固率木质纤维素厌氧发酵物腐殖酸、酚类物质含量高、质地均一性差、微生物浓度低的特点,研究了4种方法提取不同高含固率粪秸厌氧发酵物中微生物总DNA的效果。结果表明,常规的十二烷基磺酸钠法(sodium dodecyl sulfate,SDS)、十二烷基磺酸钠和溴化十六烷基三甲铵结合法(sodium dodecyl sulfate and cetyltrimethyl ammonium bromide,SDS-CTAB)和商业的粪便试剂盒法提取的DNA质量均较差,SDS法和试剂盒法未能获得聚合酶链式反应(polymerase chain reaction,PCR)扩增目的条带,SDS-CTAB法得到的条带较模糊;改进SDS-CTAB法获得的DNA杂质少、纯度高,具有较好的稳定性,A260/A280和A260/A230值分别为1.74~1.86和1.65~1.86,每克样品的DNA浓度在50 ng·μL^-1以上,电泳条带单一齐整、清晰明亮,PCR扩增的目的条带清晰度高,适宜后续分子生物学技术的分析。林格氏液洗脱、聚乙烯吡咯烷酮-40(Polyvinyl Pyrrolidone-40,PVP-40)洗涤液除杂以及裂解液和多种酶联合破壁是改进SDS-CTAB法获得该类专一性样本高质量微生物总DNA的关键步骤。     

用于水生病原菌的3种高通量活菌计数方法的比较

以一株副溶血弧菌(Vibrio parahaemolyticus)作为研究对象，比较了MTT [3-(4,5-二甲基噻唑-2)-2,5-二苯基四氮唑溴盐]比色法、ATP生物发光法和高通量生长曲线法在活细菌高通量计数上的应用效果。用96孔培养板进行不同浓度细菌活菌计数，确定了上述3种方法在副溶血弧菌活菌计数的标准曲线和线性范围。结果显示，副溶血弧菌的MTT比色法以DMSO溶解的MTT产物甲瓒在555 nm的吸光度(OD555 nm)为计数依据，活菌数的对数(LgC)与LgOD555 nm线性关系的标准曲线为LgC=(1.0439±0.0200)LgOD555 nm+(8.0565±0.0125)，相关系数R²=0.9965，线性检测范围为7.8×106~2.5×108 CFU/ml；ATP生物发光法以ATP产生的相对发光度值(RLU)为计数依据，LgC与LgRUL线性关系的标准曲线为LgC=(0.9590±0.0065)LgRLU+(0.9949±0.0366)，相关系数R²=0.9994，线性检测范围为1.0×104~3.0×108 CFU/ml；高通量生长曲线法以生长曲线达到拐点的时间(Ts)为计数依据，LgC与Ts线性关系的标准曲线为LgC=?(0.8727±0.0230)Ts+(9.0128±0.1572)，相关系数R²=0.9924，线性检测范围为1.0×100~1.0×107 CFU/ml。用3种方法对实际菌液测量并与平板计数法比较表明，ATP生物发光法与高通量生长曲线法有很好的准确性，MTT比色法准确度稍差，而高通量生长曲线法有最宽的线性范围，也最适合高通量测定。     

Relationships Between Measurements of Body Fat in Thoroughbred Horses

Equine obesity is increasing in prevalence, and weight loss diets are frequently recommended for these horses. However, there are also management situations in which horses are deemed to be too thin. To monitor the efficacy of weight change programs, estimates of body fat are often made. There are several systems available to estimate body fat, and there are benefits and challenges to using each method. The objective of this study was to compare four different methods of estimating body fat in Thoroughbred horses. In 14 mature Thoroughbred horses, relationships among body condition score (BCS), morphometric measurements, ultrasonic measures of subcutaneous fat depots, and estimation of total body fat (BF_D) via measurement of total body water through deuterium oxide dilution were evaluated. Body condition scores ranged from 4.5 to 6.5 on a 9-point scale. Body condition score, heart girth-to-body weight ratio, and BF_D were all positively correlated with each other (P < .05). Subcutaneous fat depth at the tailhead tended to be positively related to BF_D when only horses with BCS ≥ 5 were included (P = .0680). These data suggest that BCS remains a simple means of monitoring adiposity in mature horses in moderate condition. Tailhead fat depots may become useful for monitoring changes in body fat in Thoroughbreds with a BCS above 5, although more work with animals of higher adiposity is required and at different times of year.     

土壤交换性铝的三种测定方法比较

为了准确高效地检测土壤交换性铝含量,探寻适宜的检测方法。比较分析了氯化钾交换-中和滴定法、铝试剂法和羊毛铬花青R比色法所测交换性铝的差异性、精密度、准确性和适用性。结果表明,3种方法所测交换性铝无显著性差异。但羊毛铬花青R比色法的精密度优于氯化钾交换-中和滴定法和铝试剂法,羊毛铬花青R比色法平均回收率达99.28%,准确性高于另2种方法。羊毛铬花青R比色法的线性范围在0~0.32 mg/L,对应吸光值范围在0~0.778;铝试剂法的线性范围在0~0.8 mg/L,对应吸光值范围在0.006~0.157;与铝试剂法相比,羊毛铬花青R比色法的线性范围小于铝试剂法,但其吸光值范围大于铝试剂法。羊毛铬花青R比色法显色剂与显色物质吸收峰间隔较远,测定背景干扰小,方法灵敏度较高。羊毛铬花青R比色法检测单个样品的平均用时为4.2 min,检测效率高于另2种方法,且操作简捷,适用性较高。因此,推荐羊毛铬花青R比色法为土壤交换性铝的测定方法。     

不同耕作方式对辽西褐土物理性状及玉米根系分布的影响

通过连续3年大田试验，对旋耕、翻耕、深松3种耕作方式下的土壤物理性质、玉米根系分布和产量进行测定。结果表明，与翻耕和旋耕相比，深松显著增加了玉米田土壤耕层厚度和降低了犁底层厚度。在中下层土壤，深松还降低了土壤紧实度和容重，改善了土壤的孔隙状况，有利于玉米根系向下生长，使得中下层土壤的玉米根系不仅更丰富，而且占总根系量的比例也更高，最终提高了玉米产量。本研究表明，深松耕作有利于改善辽西褐土区土壤结构和促进玉米生长。     

车-液耦合响应下液罐车稳定性控制仿真

为了提高液罐车行驶安全性、减少液罐车侧翻、失稳所带来的危害,对于液罐车在转向或换道时车-液耦合动态响应对整车稳定性的影响进行了研究。联合液体纳维斯托克斯和流动控制方程,应用计算流体动力学软件ANSYS/Fluent建立并求解液体晃动模型,通过结合液体晃动模型和三自由度液罐车刚体模型获得液罐车车-液耦合动力学模型,分析有无控制策略情况下,液体晃动对液罐车横向稳定性的影响。仿真结果表明:提出的模糊差动制动控制策略能够有效提高车辆抗侧翻能力,减少罐车运输过程中交通事故的发生,对液罐车运输有指导意义。     

预处理及培养方法协同作用对新铁炮百合种子萌发的影响

【目的】 研究不同预处理方式下培养方法协同作用对新铁炮百合种子萌发的影响。【方法】 以新铁炮百合雷山1号种子为材料,采用三因素四水平正交试验设计,研究不同水平的预处理方式、培养温度、培养方式对新铁炮百合雷山1号种子萌发的影响,以及不同温度下种子萌发过程中可溶性糖和过氧化物歧化酶(SOD)的动态变化规律。【结果】 培养温度是影响新铁炮百合雷山1号种子萌发的主要因素,其次是预处理方式和培养方式。雷山1号种子的最佳预处理方式是4℃浸种7 d,最佳培养温度是21℃,最佳培养方式是土壤播种,发芽率为99.18%,播种后第9 d发芽指数为4.65。不同温度处理下,种子萌发过程中超氧化物歧化酶(SOD)活性表现出先增加后下降的趋势,可溶性糖含量则呈现出先下降再上升的趋势,其中21℃处理下种子的抗逆性和贮藏物质的转化利用要高于15、18和25℃处理下的种子,21℃为适宜温度。【结论】 雷山1号种子的最佳处理方式为4℃浸种7 d于21℃下土壤播种。